---
title: "CUEnet (LAN)"
canonical: "https://docs.cuesystem.com/space/CUM/485654547/CUEnet%20(LAN)"
format: markdown
---
# 10/100 BaseT LAN Connector

The 10/100 BaseT LAN is a standard network connection 10/100 BaseT LAN using RJ-45 connector. The length of the Ethernet cable connecting controller to the network must not exceed 100 meters.

#### Connector pinout

|  |  |  |  |
| --- | --- | --- | --- |
| RJ-45 | Pin | Signal | Cat5 Cable Color |
| ![image](media://5a831415-95ec-4770-b7da-8e5964c8f38c) | 1 | TX_D1+ and PoE | White / Orange |
| 2 | TX_D1- and PoE | Orange |
| 3 | RX_D2+ and PoE | White / Green |
| 4 |  | Blue |
| 5 |  | White / Blue |
| 6 | RX-D2- and PoE | Green |
| 7 |  | White / Brown |
| 8 |  | Brown |

# Direct PC Connection

Attach one end of an RJ-45 Ethernet cable to the CUEnet (LAN) port and attach the other end of the RJ-45 Ethernet cable to your computer. Use straight-through cable if your PC supports autosense or crossed-over cable if your PC doesn’t support autosense.

![image](media://5e8cb238-c3a3-4d68-9278-7ce34a9dee9d)

# LAN Network Connection

Attach one end of an RJ-45 Ethernet straight-through cable to the CUEnet (LAN) port and attach the other end of the RJ-45 Ethernet cable to your computer.

![image](media://025fb558-e8cd-4438-b27a-85974333c82b)


> Macro (excerpt)
> 
> # Windows Local Network Settings
> 
> For Windows 7 steps are
> 
> 1. Start Windows 7.
> 2. Click Start.
> 3. Enter ncpa.cpl to the Search Box and press Enter. Following window is displayed.
>   
> 
> For Windows XP steps are
> 
> 1. Start Windows XP.
> 2. Click Start, then click Control Panel choose the option to switch to Classic View.
> 3. Double-click Network Connections.
> 
>   
> Following steps are
> 
> 1. Right-click on network adapter used for connection with controller and then right-click and select Properties.
> 2. Select Internet Protocol (TCP/IP) and click Properties button.
> 3. Select Use the following IP address option. Set IP address to 192.168.1.1 (or other address different from 192.168.1.127 and from 192.168.1.128) and Subnet mask to 255.255.255.0. Leave other options unchanged and click OK.