---
title: "Using SetFixIP"
canonical: "https://docs.cuesystem.com/space/CVCDD/441122836/Using%20SetFixIP"
format: markdown
---
The application **SetFixIP_Vxx **can help to set the CoolMasterNet Unit To fixed IP.

The CoolMasterNet device is by default set to DHCP mode and thus the actual IP, mask and gateway is set by DHCP server in the network.

To set the CoolMasterNet to fixed IP proceed as follows

- Connect the CoolMasterNet device and programming PC to existing LAN with working DHCP server

- On the PC open the **SetFixIP_Vxx **and there Configuration

- Change the IP address property of the CoolMasterNet! Device in the project according actual  value

- The actual value of IP assigned by DHCP can be read on the CoolMasterNet display directly(in right lower corner)

- Start Debug profile ”**TouchPanel1 Simulation**”  fill-in the **NEW IP,Mask, Gateway,Port** an press **Submit**

Screenshot of Configuration :

![image](media://9740ce58-4349-449b-a7c8-4362e2b67ce5)

Screenshot of Debug of TouchPanel1 Simulation:

![image](media://bceffe0c-790a-4a5e-b810-c12bda5edb65)

> 📝 Note:   
> 📝 In case of New IP setting which is not accessible in original DHCP network used for SetFixIP - Then the setting results can be used only after connecting the CoolMasterNet to new network.