---
title: "Mechanical installation"
canonical: "https://docs.cuesystem.com/space/KUM/455376930/Mechanical%20installation"
format: markdown
---
The keypadCUE-55 can be installed as follows:

<details>
<summary>Wall installation</summary>

The keypadCUE-55 is fully compatible with standard electrical wall boxes. A [https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/483295382](https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/483295382) for simple and quick installation is supplied as an optional accessory which has to be **ordered separately**.

Installation steps are as follows:

- Install the wall adapter on the electrical wall box using appropriate fasteners. Keep maximum screw dimensions as described below.
- Using a small flat screwdriver remove the transparent cover and diffusor.
- Plug the connection cable and insert the keypad with plastic frame into the wall adapter.
- Attach the keypad using the mounting screws M 2.5 x 12.
- Place the diffusor and printed label into the keypad. Then put the transparent cover over them. In doing that, insert the transparent cover under one side of the keypad and bend it slightly until it is possible to insert the other side of the cover as well.
</details>

<details>
<summary>Installation to interconnection box</summary>

The keypadCUE-55 is fully compatible with **PANCONNECT **interconnection tabletop boxes. This type of installation is suitable for simple room control systems. 

The PANCONNECT interconnection box must have a [https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/483328001](https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/483328001) for 55 x 55 mm module mounting. It **has to be ordered separately**.

![image](media://430c34cd-2795-42dd-a8d7-cc4c640ad7e7)

For installation

- Remove transparent cover and diffusor as described in the section [https://cue.atlassian.net/wiki/spaces/KUM/pages/456425516](https://cue.atlassian.net/wiki/spaces/KUM/pages/456425516).
- Plug the connection cable and attach the keypad into the Pan Adapter 55 using the mounting screws M 2.5.
- Finally, place back diffusor, printed label and transparent cover.
</details>

<details>
<summary>Installation using Tabletop Holder 55</summary>

The [https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/482903060](https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/482903060) allows for a angled installation **on the table surface**.

Installation steps:

- Using a small flat screwdriver remove the transparent cover and diffusor.
- Attach the keypad to the adapter using the mounting screws M 2.5 x 12.
- Place the diffusor and printed label into the keypad. Then put the transparent cover over them. In doing that, insert the transparent cover under one side of the keypad and bend it slightly until it is possible to insert the other side of the cover as well.
- Fix the adapter on the desk with screws or double-sided adhesive foil.
</details>

<details>
<summary>Under Desk Holder 55</summary>

The [https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/483295364](https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/483295364)  allows for a angled installation **under the table desk**.

Installation steps:

- Using a small flat screwdriver remove the transparent cover and diffusor.
- Attach the keypad to the adapter using the mounting screws M 2.5 x 12.
- Place the diffusor and printed label into the keypad. Then put the transparent cover over them. In doing that, insert the transparent cover under one side of the keypad and bend it slightly until it is possible to insert the other side of the cover as well.
- Fix the adapter under the desk using screws.
</details>