---
title: "Tabletop Stand 5 Quick Start"
canonical: "https://docs.cuesystem.com/space/QS/1387200534/Tabletop%20Stand%205%20Quick%20Start"
format: markdown
---
# Mechanical description

![Tabletop_Stand-5_mechanical_description.png](media://ee1aef9e-a469-4f83-a136-a12f72a380b4)

# Instalation

### Freestanding Tabletop Mounting

1. Stick the anti-slip rubber bumpers to the corresponding pads on the bottom of the stand.
2. Fit the panel with the appropriate holes on the tabletop stand hooks.
3. Slide the panel to the right until the fixing latch clicks into place.
4. Remove cable bushing cover.
5. Connect the Ethernet cable. Route the cable in a loop so that it passes through the holder and the bushing. Fix the Ethernet cable to the cable holder with the appropriate clamp and two screws.

### Fixed Tabletop Mounting

1. Prepare a pass-through for the cables in the table. You can use the drilling template on the other side.
2. Use the appropriate screws to attach the tabletop stand to the table.
3. Route the cables (Ethernet + contact closure input, if used) to the tabletop stand and plug them into the touchCUE-5-knob.
4. Fit the panel with the appropriate holes on the tabletop stand hooks.
5. Slide the panel to the right until the fixing latch clicks into place.

## Removing the panel

1. Insert a suitable tool (thin screwdriver or Allen screw with a maximum diameter of 2 mm) into the hole in the right side of the panel to a depth of approx. 15 mm.
2. Push the fixing latch by gently levering the tool in the direction of the arrow.
3. Move the panel to the left and remove it from the mounting adapter hooks.

![Removing.png](media://bd3dad8f-f8a3-45d4-905d-f5e248f8c611)

# Drilling template

To prepare the installation, an drilling template is available at a scale of 1 : 1. 



 

> Macro (excerpt-include)



# Documentation

Detailed product information can be find here:[https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/1015939092](https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/1015939092)