---
title: "touchCUE-5-knob Quick Start"
canonical: "https://docs.cuesystem.com/space/QS/874283014/touchCUE-5-knob%20Quick%20Start"
format: markdown
---
# Mechanical description

  
> Macro (excerpt-include)



# Power supply and LAN connection

### Ethernet without PoE Infrastructure

![QS158_touchCUE-5-knob_No-PoE.png](media://7f1596fd-5971-4329-ba8d-886d558a2468)

### Ethernet with PoE Infrastructure

![QS158_touchCUE-5-knob_PoE.png](media://ea7e0b31-9eee-4cbd-9eec-5aed7cc6a5ce)

# System Default setup

# Installation

1. Install the mounting adapter on the electrical wall box using low-head screws.
2. Connect the network cable and fit the panel with the appropriate holes on the mounting adapter hooks.
3. Slide the panel to the right (down in case of portrait installation) until the locking latch clicks into place.

The touchCUE-5-knob can be installed in the following ways:

<details>
<summary>Tabletop installation</summary>

**Direct method**

The unit can be installed directly on the table and fixed against movement. In this case, a hole for the cable must be prepared in the table surface.

![touchCUE-5-knob_table_A.png](media://581ad3ca-bba5-4a7b-952e-648740290530)

**Using the stand**

The unit can be placed on the table using [Tabletop Stand 5](https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/1015939092), which must be ordered separately. The stand provides panel angle 15°

![touchCUE-5-knob_stand_A.png](media://2ff4123b-88c8-46f8-b050-e3c7555521e7)
</details>

<details>
<summary>On-wall installation</summary>

The unit is installed on the wall using an on-wall adapter. The adapter is fixed directly to the electrical box with screws. Installation is possible even without an electrical installation box.

![touchCUE-5-knob_wall-landscape_A.png](media://ae8d57d1-63c7-43ba-9d47-1412d2d5d8b3)
</details>

## Removing The Panel

1. Insert a suitable tool (thin screwdriver or Allen screw with a maximum diameter of 2 mm) into the hole in the right side of the panel to a depth of approx. 15 mm.
2. Push the fixing latch by gently levering the tool in the direction of the arrow.
3. Move the panel to the left and remove it from the mounting adapter hooks.

![touchCUE-5-knob_R02_Release_panel.png](media://68f0360b-c04c-4c2e-a863-600d64d34a4f)

## Panel Orientation

Always orient the panel on the wall so that the **sensors are on the right for landscape** mode or on the **bottom for portrait** mode as shown in the following pictures.

# Setup Guide

Complete setup guide can be find here: [https://cue.atlassian.net/wiki/spaces/WTPUM](https://cue.atlassian.net/wiki/spaces/WTPUM) 

Detailed product information can be find here: [https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/664666192](https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/664666192)   


> Macro (excerpt-include)



# Note

CS0627