---
title: "Simple Setup quick start"
canonical: "https://docs.cuesystem.com/space/SSG/482935060/Simple%20Setup%20quick%20start"
format: markdown
---
For a quick start follow these steps:

1. **Connect **the controller and your PC to the same network.
2. Go to controller [https://cue.atlassian.net/wiki/spaces/ADMINWEB/pages/274563094](https://cue.atlassian.net/wiki/spaces/ADMINWEB/pages/274563094).
3. Go to **Simple Setup**.
4. **Create a project** and fill in all the necessary information.
5. Create or download all the **device drivers** you need to control your specific configuration.
6. **Connect the controlled devices** to specific channels (control ports).
7. **Create macros **needed for system function, e.g. macro system on/off, display input selection, volume up/down, mute, ...
8. Prepare the **control panel layout** - define button labels and captions and assign pre-prepared macros to specific buttons.
9. **Assign layout** to the specific control panel. In case you use only one keypad, the default layout is automatically assigned.
10. Assign pre-prepared macros to events.