---
title: "Simple Setup sections"
canonical: "https://docs.cuesystem.com/space/SSG/483066436/Simple%20Setup%20sections"
format: markdown
---
The Simple Setup web interface consists of the following sections:

- **Project **- create a new project, general information about the project, export & import of a complete project.
- **Devices **- the section where device drivers can be created, edited, imported from a file, exported to a file, and imported from the CUE cloud library. In addition, this section lists embedded drivers. Embedded drivers are built-in device drivers, which can not be changed by the user.
- **Channels **- in this section a controlled device is connected to the real channel (control port). Channel types are IP, serial, universal (digital out, digital in, serial out, infra-red out), and low-voltage relay.
- **Macros **- this section serves for macro creation. A macro is a set of commands executed sequentially. The macro includes system commands (e.g. keypad indicator control, wait, etc.) and controlled device commands (created in the section devices). Every macro can be started by the press of a button on the control panel as well as by an event (for example contact close on digital input).
- **Layouts **- this section serves for control panel design and functionality. A label and an icon for every button can be defined and pre-prepared macros are connected to the specific buttons. A keypad label can be created as a PDF and then printed.
- **Panels **- this is a list of connected control panels (keypads). All physically connected panels are listed and pre-prepared layout can be assigned to the specific panel.
- **Events **- events are generated by the system regarding to the change of input status. Pre-prepared macros can be assigned to specific events.