---
title: "Sensor settings"
canonical: "https://docs.cuesystem.com/space/TOSASG/273154645/Sensor%20settings"
format: markdown
---
In the left menu of Admin web, tap “**Menu**”. The following home page will be shown.

![image](media://b8400bb0-9fb4-4eb1-baaa-b65ced3ac883)

Now there is a new button “**Sensor setup**”. Tap it to enter the page with the sensor setup.

![image](media://1ebb1e8c-9652-4d82-beba-249feec00912)

Here you can set sensor parameters connected to the given versatile port.

In the item “**Mode**”, select “**Occupancy sensor**”, if there is a sensor connected to the port, or “None” if this versatile port is not used.

In the item “**Name**”, assign a mnemonic name for the sensor, e.g. name of the room, where the sensor is installed. This name must be unique within the controller. This name, together with the Magic name of the controller, will be used later in the reservation suite configuration.

In the item “**Active State**”, select the state of sensor relay contacts if the sensor detects the presence of people. For details see the [Hardware connection](https://cue.atlassian.net/wiki/spaces/TOSASG/pages/273154590).

In the **Occupied state timeout**, set the time during which the room is marked as busy after motion detection, even if the sensors do not detect any movement. See chapter Introduction / Sensors for details.

Tap the “**Save**” button to save the changes. Use the “Menu” button to go back to the Home page.