---
title: "Setup & user application"
canonical: "https://docs.cuesystem.com/space/WTPUM/459833345/Setup%20%26%20user%20application"
format: markdown
---
# System Default setup

When the System Default button is pressed for **longer than 5 sec.**, the system default function is performed. For a detailed description see [Factory and System Default](https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/485425155).

# Setup

The unit can be set up using the following tools:

- [https://cue.atlassian.net/wiki/spaces/ADMINWEB/pages/274563094](https://cue.atlassian.net/wiki/spaces/ADMINWEB/pages/274563094)
- [https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/459735048](https://cue.atlassian.net/wiki/spaces/PRODUCTS/pages/459735048) (touch panels only).

# User application

The user application has to be programmed by **Cue Visual Composer** programming tool.

There are two ways to upload a user application:

<details>
<summary>Using Cue Visual Composer</summary>

The steps are as follows:

1. Connect the unit to your computer using the same data network.
2. Run Cue Visual Composer on your PC.
3. Open the appropriate project in Cue Visual Composer. It’s necessary to have an appropriate unit properly inserted and configured.
4. Use the toolbar button **Final **to open the Upload and Export Application dialog box.
5. Be sure your unit is checked.
6. Use the button **Upload **to start application upload.
7. If unit firmware isn’t actual, it will be uploaded automatically first and then the application upload will be finished.
</details>

<details>
<summary>Using Admin Web</summary>

The steps are as follows:

1. Connect the unit to your computer using the same data network.
2. Run Cue Visual Composer on your PC.
3. Open the appropriate project in Cue Visual Composer. It’s necessary to have the appropriate unit properly inserted and configured.
4. Use the toolbar button **Final **to open the Upload and Export Application dialog box.
5. Be sure your unit is checked.
6. Use the button **Export All... **to export the application and store it in file *.cvca.
7. Go to[https://cue.atlassian.net/wiki/spaces/ADMINWEB/pages/274563094](https://cue.atlassian.net/wiki/spaces/ADMINWEB/pages/274563094).
8. Go to Admin Web page **System **and check the current firmware version. In case there is no actual firmware version, upload the firmware version that corresponds to the firmware version in the Cue Visual Composer project.
9. Go to Admin Web page **Applications **and upload application file *.cvca.
10. Start uploaded application using the Admin Web button **Start**.
</details>